CAT 6 & CAT 7
Modular copper connection solution

In the DACH region, the use of shielded components of category 6A (class EA) in LAN building cabling is the current state of the art.

The use of shielded components of category 6A (class EA) in LAN cabling is the current and widespread state of the art.

Here, a transmission frequency of 10 GBit per second (10GBase-T) is achieved over a cabling distance of 90 meters in permanent link with CAT 6A components.

In comparison: A cabling route with CAT 6 class E components transmits a maximum of 5 GBit per second (5GBase-T). The transmission speed can only be transmitted over shielded Class E cabling sections.

TO THE CAT 6 PATCH CORDS TO THE CAT 6_A PATCH CORDS TO THE CAT 7_A PATCH CORDS

Here, a transmission frequency of 10 GBit per second (10GBase-T) is achieved over a cabling distance of 90 meters in permanent link with CAT 6A components.

TO THE CAT 6 PATCH CORDS

TO THE CAT 6_A PATCH CORDS

TO THE CAT 7_A PATCH CORDS

As standard, 1GBase-T is certified via shielded and unshielded components according to the standard.

Two components
for a stable connection

Data and power can be transmitted simultaneously via the copper medium. The power supply according to the four-pair feed (4PPoE) corresponds to the current industrial standard IEEE802.3bt and the 10GBase-T data transmission is carried out according to ISO/IEC 11801 3rd Edition and EN 50173-1.

Optimal synergy effects
from data line and connection

Data line

DIGITUS^® CAT 7_A data cables are designed for frequencies up to 1,500 MHz.

In addition, our CAT 7_A data cables with a core cross section of AWG 22/1 offer the optimum conditions for remote powering. The increased core cross section reduces cable heating and the resulting power loss. This significantly counteracts the aging process of the cabling section compared to the use of CAT 7 data cables with a core cross section of AWG 23/1.

TO THE CAT 7_A CABLES

Connection

The CAT 6_A Keystone module is ideal for modular connection technology to generate the best possible attenuation budgets* in the pernanent link.

* Crosstalk (NEXT), insertion loss (IL) and return loss (RL)

TO THE KEYSTONE MODULES

The advantages of the combination

from CAT 6_A and CAT 7_A

Longer
cabling route

Higher
operating frequency

Popular

connector compatibility

The optimal addition

Field connector

The innovative CAT 6A field connectors from DIGITUS^® offer further advantages for remote powering. The field plugs are suitable for direct mounting on data lines with a core cross section of up to AWG 22/1.

TO THE FIELD PLUG

Thus, the number of connectors in the Channel Link can be significantly reduced and heating is also counteracted here. An example of this is the direct connection of an IP-capable camera and a PoE-capable switch.

TO THE SWITCHES